UEFA TV

List of contents of this article:

• 1,UEFA TV Can two public security upload systems be installed in the same local area network
• 2, How to batch install operating system
• 3. How to install the system through the local area network

Can two public security upload systems be installed on the same local area network?

Step 1 First of all, ensure that two computers can access the Internet normally in the same local area network. The following settings can be made.First, enter the computer. Step 2 Second, right-click "Properties" to pop up the page. Step 3 Click "Security" in the software disk properties dialog box.

Redo the system, and the hard disk can be done after it is full. However, you should pay attention to the alarm with one machine and two uses. The user may be notified, so it's better to keep a low profile... If you have called the police, you should not be able to connect to the public security network if you don't redo the system.

Digital formula, as long as there is a digital matrix. But the front-end should be a digital camera or an encoder. Transmitted through the public security network. The natural intranet can also be accessed normally. Simulation, this is a little troublesome. Through the one-two distributor, it is divided into two signals, one way to the wall (analog matrix) and one way to the video recorder.

If you want to connect two hard disk recorders to the same local area network, and then manage two monitoring devices at the same time through one computer.Then connect the two monitoring hosts and the computers used for monitoring management to the LAN port of the router with a network cable, and the address is assigned to the same IP segment.

There are two types, one is the extranet and the other is the intranet. The external network is open to the public. Most of the content of this network is legal knowledge, police dynamics, and "publicable" (called statistical cases in the industry) in the police community.

How to batch install the operating system in the local area network

1. The method of batch installation of the operating system in the local area network First of all, we need to find a computer that works normally in the local area network and install Chenglong Network on the computer at the same time. The fully automatic network engraving tool (which can be searched and downloaded in Baidu), and at the same time automatically produces or downloads the Ghost version of iSO mirror files from the Internet.

2. First, make a startup disk with a ghost driven by a network card. StartProgramsSymantecGhostGhostBootWizard-NetworkBootDisk If your network card is selected directly in the list, you can generate a boot disk with PC-DOS.

3. For the construction of the local area network, the quick installation and debugging scheme of the all-in-one machine can be used to quickly copy the system that has been installed on a machine to other computers in the local area network. Although this technology is very convenient for installation, it is very difficult to learn. As long as you learn it, it can be applied on a large scale.

4. Double-click to open the downloaded U Master U disk boot disk making tool installation package and perform the installation operation. After opening the installation package, the installation window will be displayed, and click [Install Now].

5. Through the method of installing the system through the local area network, choose any computer in the local area network to set it up as a network engraving server. Open the fully automatic network engraving tool of Chenglong Network Maintenance, click only network engraving C disk, then click Browse to select gho system mirror file, and finally click to start network engraving.

6. Just use the network system, provided that each machine can start the machine with the network card chip. The operation is a little complicated, and the specifics are not clear here. You can search for the network system and how to use it on Baidu. The 200 machines in our unit were installed in this way, and it only took 4 hours.

How to install the system through the local area network

1. First, make a ghost boot disk with network card driver. StartProgramsSymantecGhostGhostBootWizard-NetworkBootDisk If your network card is selected directly in the list, you can generate a boot disk with PC-DOS.

2. The method of installing the system through the local area network. Choose a computer in the local area network to set it up as a network engraving server. Open the fully automatic network engraving tool of Chenglong Network Maintenance, click only network engraving C disk, then click Browse to select gho system mirror file, and finally click to start network engraving.

3. You can choose the easy-to-start USB disk startup production tool to reinstall the system.

4. Next, you can install the operating system through the network on other computers in the local area network (network engraving): enter the CMOS interface of other computers in the local area network and set the first startup to LAN (network engraving) mode.

5. Next, you can install the operating system through the network in other computers in the local area network (network engraving): enter the CMOS interface of other computers in the local area network and set the "first startup" to "LAN" (network engraving) mode.

6,---8. Select "Create a new release folder", enter the location where the installation file is saved on the hard disk, and enter the shared name (used when installed on other computers in the local area network, you can enter it at will). Click "Next".