DigiPlus fair value

List of contents of this article:

• 1. How to solve the problem that the new motherboard computer cannot install the xp system
• 2, 3 ways to install XP and win7 dual systems
• 3、 How to install the XP system?
• 4, The correct posture of reinstalling the system

How to solve the problem that the new motherboard computer cannot install the xp system

1. Check the motherboard compatibility: First, make sure that you The motherboard is compatible with the XP system. Some new motherboards may no longer support XP system, so when buying a motherboard, you should read the product manual carefully or consult the manufacturer to confirm whether the motherboard supports XP system installation.

2. In summary, if the XP system cannot be installed on the new motherboard computer, the problem can be solved by checking hardware compatibility, updating drivers, adjusting BIOS settings, checking the installation media or upgrading the operating system. Choose the appropriate solution according to the specific situation to ensure that the system can be installed and operated normally.

3. Change to compatibility mode. The setting method of notebooks of various brands (the assembly machine generally depends on the instructions of the motherboard.

4. The following editor will share the solution to the problem that the new motherboard computer cannot install the winxp system.

5. If the computer can enter the system, you can scan the disk C on the local machine. If you can't enter the system, hang it on another machine to scan and repair the C disk.

3 ways to install XP and win7 dual systems

1. First of all, you need to prepare a main partition for installing the XP system. In the Win7 system, it is recommended to use the disk manager to create a main partition with a capacity of not less than 10GB (as shown in Figure 1). Then use WIn XP installation CD-ROM, just start the computer and install it. The installation method is similar to the installation of the XP system.

2. Install XP first, and then install Windows 7. It's better not to do the other way around, otherwise XP will not overwrite the boot manager of Windows 7, which will be more troublesome. In a word, follow the installation principle of "old version to new version".

3. Method 1: Install a new CD with XP: a main partition with a capacity of about 10~20GB has been prepared on it (as shown in the figure). Then use the WinXP installation CD to start the computer and install it. The installation method is similar to the usual installation of XP.

How to install the XP system?

1, · Key point 1: Enter the serial number. Here we need to enter the serial number of Windows XP to proceed to the next installation. Generally speaking, we can find the serial number on the box of the system CD-ROM. · Point 2: Set up a network connection. The network is an important part of the XP system and is also indispensable for current life.

2. One-click recovery disk installation Buy an XP one-click recovery disk can be partitioned during installation.Partition tool installation uses the partition tool, format the partition first and then install the system. When the BIOS settings are turned on, press the corresponding key (Delete, F2 are more commonly used according to different choices of the BIOS, and there are generally prompts on the screen) to enter the BIOS settings.

3. The following are the detailed system installation steps: Steps: First, set the optical drive startup priority.

4. Enter the installation 1) Restart the computer and move the highlight bar to the CDROM with the arrow keys. At this time, insert the XP CD into the optical drive 2) When Press any key to boot from CD appears, immediately return 3) For a moment, the screen appears welcome In the installer interface, select Install Now.

5. The second step is to install the XP system from the CD-ROMPut in the XP installation disc before restarting, and press Enter when you see the CD word at the bottom of the screen. Only then can the light start, otherwise the computer will start to read the hard disk, that is, skip the light start to start from the hard disk.

The correct posture of reinstalling the system

The power is cut off during installation. In this case, the system is generally not successfully installed, and the reinstallation of the operating system can return to normal. Insert the system disk and insert the system disk (system CD-ROM and system USB flash drive) into the computer. Set the BIOS to restart the computer, then enter the BIOS and set the system disk as the preferred boot device in the BIOS.

Find a repairman to help you. If it is caused by this problem, try to turn it on and off repeatedly, and try it for a while. It really can'tJust reinstall the system. If you can't reinstall it yourself, you can spend 30 yuan to find a repairman to help you.

The operation steps of computer system USB disk production and reinstallation system are: 1). Make a boot USB flash drive: Go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make it into a system USB flash drive to omit the following steps), search and download boot USB flash drive making tools such as old hairy peach or cabbage on the Internet, insert the USB flash drive into the computer to run this software to make a boot USB flash drive.